Description
Don't just turn heads.... CREATE WHIPLASH!
BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers. Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.
BLACKFIRE Paint Sealant is the state-of-the-art paint sealant. The tri-polymer system results in a true blanket of protection on your paint. It is almost impenetrable to environmental fall-out and contamination. The increased surface area of active polymers creates a microscopically level surface that reflects light across the spectrum and creates a super slick surface with little drag. You can feel the Wet Diamond polymers at work. Because each of the Wet Diamond polymers reflect and refract light differently, you are left with a look that is unique and without compromise. We have achieved the depth and shimmer (created by bending the light) of a carnauba wax, while maintaining the characteristic high-gloss shine of a paint sealant.
But the unique dripping wet look of BLACKFIRE Paint Sealant is only the beginning of the story. The Wet Diamond polymers form a tight matrix of protection on the surface of your vehicle. This sealant has it all: looks, durability, and the ability to protect your paint from acid rain, bug remains, contamination, environmental fallout, and water spots. BLACKFIRE Paint Sealant is further boosted with Polycharger for maximum shine, slickness, and longevity.
 BLACKFIRE Paint Sealant can be applied by hand or with a DA or orbital polisher. |
 |
BLACKFIRE Paint Sealant is a sophisticated oil-in-water emulsion is safe for all finishes, with or without a clear coat. This emulsion contains a small amount of a very refined mineral spirit in a water base. Multiple coats can be layered to deepen the gloss without drying or weakening the paint.
BLACKFIRE Paint Sealant can be applied by hand or dual action polisher. It applies easily and buffs off uniformly even in climates of high heat and high humidity. You simply walk around your car wiping on and buffing off as you go. Nearly effortless.
Wet Diamond’s incredible shine is resistant to detergent washings and ultraviolet radiation. This keeps your car’s finish protected month after month and wash after wash.
BLACKFIRE Paint Sealant can be used by itself as a final sealant or as the foundation of BLACKFIRE's signature Wet Ice Over Fire shine.
Features:
- Creates a deep gloss that “shimmers” like water.
- Colors radiate with depth and clarity.
- Highly resistant to UV and infrared radiation.
- Safe for all painted finishes.
Directions:
For best results clay the paint first with BLACKFIRE Poly Clay and polish with BLACKFIRE Paint Cleaner or BLACKFIRE Polish.
Hand Application: Always use on a cool surface out of direct sunlight. Apply a quarter size amount of product on a dry applicator pad and wipe on the surface using small, circular motions. Allow Wet Diamond All Finish Paint Protection to dry before buffing. Buff haze with a clean Cobra microfiber towel.
Machine Application: Apply BLACKFIRE Paint Sealant using a finishing pad or wax pad on an orbital polisher, such as the FLEX XC 3401 VRG Orbital Polisher. Work on a small area, about 24 to 24 inches square, out of direct sunlight. Apply two 6 to 8 inch lines of All Finish Paint Protection directly onto the surface. With the machine off, spread the sealant over the surface using the dry foam pad. This coats the foam pad and the paint with sealant. Place the pad on the paint and turn the machine on. Set the speed dial on the polisher between 3 and 4. Work the pad over the surface in a back-and-forth motion and then an up-and-down motion. Apply until the sealant starts to dry. Cover one section of the vehicle at a time (i.e. the hood, a door, fender, etc.) Allow a haze to form. Hand buff to a brilliant shine with a Cobra Microfiber Towel.
Optional top coat for maximum impact:
For ultimate depth and wetness, apply one coat of BLACKFIRE Paint Sealant and allow to cure for eight hours. Top with two coats of BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax. The resulting shine is wetness over energy, a Wet Ice over Fire Shine!
BLACKFIRE Paint Sealant is VOC compliant in all 50 states.
128 oz.