Description
Pre-wash with snow!
CarPro Lift Snow Foam is a highly concentrated pre-washed foaming agent that dissolves and lifts away dirt, grime and more so that it can easily be removed during the wash. CarPro Lift Snow Foam can be used in different foaming tools and produces a thick foam.
Before you take the time to fully wash your vehicle, take a little extra pre-step to pre-wash your car. By pre-washing your car, you get an early clean to dig deep to reach the contaminants that a full wash may not be able to get as easily. And why not do it in a fun, snow, foamy way?
CarPro Lift Snow Foam is a highly concentrated, pre-wash foaming agent that can be used with different tools, such as canisters, guns and pressure washers. This thick foam with prep the most contaminated areas of the vehicle. CarPro Lift Snow Foam will soften contaminants such as bugs, baked on dirt and more. It basically lifts away a large amount of dirt and grime in a completely touchless manner, that is used before the application of a shampoo.
This pre-wash formula is designed to offer maximum wetting and rinses off extremely well. It even asks as a true active surface agent. The bubbles of CarPro Lift Snow Foam soak deep into the harden debris and will allow it to be released during the actual wash. It has a powerful of all-purpose cleaner unless you dilute it. When diluted to 1:10 ratio, it can even strip waxes and sealants from the surface.
DIRECTIONS:
How to use a Pre-Wash:
-Use only on cool surfaces. Do not use in direct sun. Do NOT allow to dry on surface.
-Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
-Allow the product to remain on the surface for a minute or as long as possible without allowing too dry.
-Power rinse off. This completes your Lift Pre-Wash.
-Wash with CarPro Reset.
How to use as Single Wash Solution:
-Use only on cool surfaces. Do not use in direct sun. Do not allow shampoo to dry on the surface!
-Pre-rinse vehicle with free-flowing water to remove loose debris
-Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
-Allow the product to remain on the surface for a minute and then wash from the top down using our favorite wash mitts.
-Its critical to rinse your mitt or sponge periodically in a second bucket filled with clear water or with a hose.
-After washing, rinse the vehicle thoroughly with free-flowing water to remove shampoo residue, and dry with a microfiber towel.
1 L