Description
A coating meets graphene
Enter the world of graphene coatings with DP GR4 Graphene Coating, featuring graphene-oxide resins and emulsions to create a rock-hard barrier of protection. The protection of DP GR4 Graphene Coating works on paint, glass, chrome and more. DP GR4 Graphene Coating has a self-cleaning affect that will easily repel dirt, water and other contaminants, creating a water beading power that will reveal a slick and glossy surface. Plus, DP GR4 Graphene Coating is easy-to-apply and will last you up to four years of protection.
But what exactly is graphene? Graphene is the strongest material known to man; you may know it is as graphite. Imagine it as a honeycomb sheet, thick with carbon atoms. Therefore, the automotive world likes graphene because it can easily be added to plastics, metals or other materials to make it stronger. Compared to ceramic coatings, graphene reduces heat on the surface of your paint, so water spotting is even less likely. And that honeycomb designed we mentioned earlier? That design allows for a high contact angle for water to bead off easier.
DP GR4 Graphene Coating enacts up to four years of protection on your surfaces. This protection is thanks to graphene-oxide resins and emulsions that when combine create a rock-hard, microns-thick barrier. Not only is the surface protected from environmental harm, but also gives a slick, deep glossy shine. Graphene is known to impart a wet, glossy appearance after all! Plus, DP GR4 Graphene Coating adds tremendous hydrophobic properties. Because of the high contact angles in graphene, amongst other properties, DP GR4 Graphene Coating will allow for water to bead up and roll off, rather than stick around creating water spots.
Another benefit of DP GR4 Graphene Coating is its anti-static or self-cleaning properties. One of the properties of graphene allows for electrical and thermal conductivity. This simply means that it can easily repel dust and other micro particles, keeping the surface free of build up of dust and other contaminants. This makes it easier for daily or routine cleanings.
Best of all, DP GR4 Graphene Coating can work on a variety of different surfaces, including paint, glass, chrome, trim and even plastic headlights. Apply DP GR4 Graphene Coating to your vehicle once you have washed, dried and corrected any paint issues. It's also best to use a prep spray, like DP Coating Prep Spray, to remove any lingering oils that will hinder proper bonding. Once you're ready, apply several drops of DP GR4 Graphene Coating onto a microfiber applicator and apply back-and-forth in a 3x3 square foot area. Let it set for 1-2 minutes and then remove with a clean microfiber towel. After an hour, you can apply another coat, but let the surfaces sit dry for 24-48 hours for optimal results.
DIRECTIONS:-Wash, dry, and correct paint if needed.
-Shake well before use.
-Use DP Coating Prep Spray to remove any oils that would prevent proper bonding.
-Apply several drops of product onto a microfiber applicator and apply to a 3 x 3 sq. ft. area in a back and forth, crosshatch pattern.
-Allow for slight overlay to ensure even coverage.
-Allow area to set for approximately 1-2 minutes and gently remove excess product with a clean microfiber towel.
-A second coat can be applied after approximately 1 hour.
-Keep coated surfaces dry for 24-48 hours for best results.
30 ml.
Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.