Description
Lake Country’s Wool Polishing Pad is made of 100% knitted wool that is both fluffy and dense. The knitting creates a plush, uniform surface that polishes the paint to a bright shine. The density of the knitted wool provides an ample cushion between the backing plate and the paint surface. The Knitted Wool Polishing Pad is intended to polish the paint and remove minor swirls and oxidation. Use a polish or a mild swirl remover for the best results. XMT Fine Swirl Remover #2 or Wolfgang Total Swirl Remover will both work well on minor or moderate paint flaws.
A note about fluffing a wool pad: Wool pads are known to cake up but it’s an easy fix. With the polisher turned off, lay it down on the ground with the pad facing up. Set the speed to the lowest setting and turn it on. Hold a steel brush against the pad as it turns. The pile will fluff up in just a few seconds.
Your other option is to have 3 or 4 wool pads on hand so you can simply switch pads when one becomes caked.
To clean any wool or foam pads on your rotary polisher, use the Autogeek System 2000 Pad Washer. This unique wash system consists of a 5 gallon bucket containing 8 agitator wheels and a large fluid pump to pull water from the bottom of the bucket up to the pad. The Pad Washer uses the motion of your polisher to wash and dry foam and wool pads. Click on the icon at the bottom of the page for more information.
Use our 8.5 inch foam pads to refine and smooth the paint following compounding. All of our 8.5 inch pads use the 7 inch rotary backing plate.
Lake Country’s 8.5 inch Hook & Loop Wool Pads work with any rotary polisher. The 100% wool pile and SURLYN® backing ensure consistent, professional results every time you polish.